Volume 10, Number 11 (2015)
Special Issues
CONTENTS
Friction Characteristic of
Electroless Ni-P Coatings in Acidic Medium and Optimization of Coating
parameters
pp.10043-10047
Bikash Panja, Prasanta Sahoo
Analysis of Friction
Performance of Electroless Ni-P-Al2O3 Composite Coatings using Taguchi
Method
pp.10048-10053
Prasanna Gadhari and Prasanta Sahoo
Optimization and Prediction
of Surface Roughness in Die Sinking Electro-Discharge Machining of EN45
Steel Tool
pp.10054-10057
Sumit Raj, Kaushik Kumar
Optimization of Wear
Characteristics of Silica Gel Reinforced Aluminium Metal Matrix
Composite Using Taguchi Method
pp.10058-10062
Anuj Dixit, Kaushik Kumar
Experimental studies of the
Mechanical and Microstructure Properties of LM6 Metal Matrix Composite
with borosilicate Glass Reinforcement
pp.10063-10069
S.Sathish, J.David Rathnaraj
Optimization of Overcut and MRR in Electrochemical Machining of EN19
Tool Steel using Grey-Taguchi Approach
pp.10070-10074
Abhishek Tiwari, Dr. Amitava Mandal, Dr. Kaushik Kumar
Optimization of Surface
Roughness in Electrochemical Machining for EN 19 Using Artificial Neural
Network
pp.10075-10079
Abhishek Tiwari, Dr. Amitava Mandal, Dr. Kaushik Kumar
Study of Mechanical
Properties of Kaolin Reinforced Epoxy Composite
pp.10080-10084
Arnav Prakash, Kaushik Kumar, Gautam Sarkhel
Prediction of Surface
Roughness in Plasma Arc Cutting of EN31 Steel Using Artificial Neural
Network
pp.10085-10089
Milan Kumar Das, Kaushik Kumar, Tapan Kumar Barman, Prasanta sahoo
A Study of Tribological
Properties of Electroless Ni-B Coating Under Lubricated Condition
pp.10090-10095
Santanu Duari, Arkadeb Mukhopadhyay, Tapan Kr. Barman, Prasanta Sahoo
MODELING OF EMISSION
PARAMETERS FOR DI DIESEL ENGINE WITH CORN OIL USING RESPONSE SURFACE
METHODOLOGY
pp.10096-10100
Hemanandh. J, Narayanan .K.V., Prakash.S
Biogas production from whet
straw to Generate Renewable Energy using RSM
pp.10101-10108
S.Sathish, M.Ramarao, M.Senthil kumar
Comparative study of
tensile properties on Thermoplastic & Thermosetting polymer composites
pp.10109-10113
M Aniber Benin, B Stanly Jones Retnam, M. Ramachandran
The Fuzzy cost benefit
analysis of design for product development process with perspective of
remanufacturing
pp.10114-10118
Harshal Fulari, Vishal Fegade, Praveen Kumar Loharkar
A Novel Approach for the
Vendor Selection in the Refrigeration Industry
pp.10119-10122
Srikanth Kumar, M. Ramachandran
EXPERIMENTAL INVESTIGATIONS
OF COATINGS ON GRAPHITE USING SILICON CARBIDE
pp.10123-10127
HEMANANDH. J, SARMA.A.V, ADITYA, KAVIN.C, M. RAMACHANDRAN
Computational study of
turbulent flow in pipe bends
pp.101285-10133
Prasun Dutta, Sumit Kumar Saha, Nityananda Nandi
Experimental Investigation
on Performance and Emission Characteristics of Homogeneous Charge
Compression Ignition (HCCI) Engine Fuelled by Biodiesel
pp.10134-10139
Gowthaman S, Sathiyagnanam A.P
Performance Analysis and
Fabrication of Evaporative Air Cooler Using Thermoelectric Device
10140-10143
M.Anish, , R.Thamaraikannan, B.Kanimozhi, Thomaskutty geogre
Investigation on Relative
Humidity and Condensation of Water particles in a Home Kitchen
pp.10144-10147
Jayaprabakar.J, Parthipan. J, Rakesh kumar. N
Performance and Emission
Characteristics of Low heat rejection Diesel Engine fueled with Neem Oil
Methyl Ester (NOME)
pp.10148-10154
E. Sivakumar, R. Senthil, T. Aarif Muhammad
Experimental analysis of
Alternate Fuels in Thermal power plant
pp.10155-10158
Amithkishore.P, Anish.M
Thermal and Fire Retardant
Behaviour of Polyurea
pp.10159-10162
Arunkumar.T, S.Ramachandran, Sebastian P.J, C Vipin Raj
Experimental reduction of
NOx and HC emissions in a CI engine fuelled with methyl ester of mango
seed using p-phenylenediamine antioxidant
pp.10163-10167
Velmurugan.K , Sathiyagnanam A.P.
Effect of sand size and
concentration on erosion in closed impeller of centrifugal pump
pp.10168-10174
Tarang Agarwal, Shreyash Chaudhary, Shivank Verma,
Development of Fertilizer
Tablet Making Machine for Agriculture Farm
pp.10175-10180
Sachin V. Palve, Prof. Rajkumar B. Chadge
ANALYSIS OF MIXED FLOW PUMP
IMPELLER OF STAINLESS STEEL MATERIAL USING ANSYS
pp.10181-10186
Santosh Shukla, Apurba Kumar Roy
Reciprocating Wear Behavior of Al Particulate Glass Fiber Reinforced
Epoxy Composite
pp.10187-10191
Pujan Sarkar, Nipu Modak, Prasanta Sahoo
Mathematical modelling and
Vibration Analysis of an Automobile Suspension System
pp.10192-10197
Sachin S. Channe, Prof.S.D.Kshirsagar
Numerical Simulations of
the Electromagnetic Interaction with Parts of Complex Geometries
pp.10198-10203
Salim Bennoud, Houcine Benchoubane
ANALYSIS OF CEMENT PLANT
PREHEATER PERFORMANCE WITH VARIOUS LENGTHS BY USING SIMULATION TOOLS
10204-10207
R.Thamaraikannan, M.Anish, V.Sarathi, D.Ravikumar
Optimization of Wear rate
and Coefficient of Friction in Silica Gel Reinforced Aluminium Metal
Matrix Composites Using Grey-Taguchi Technique
pp.10208-10212
Anuj Dixit, Kaushik Kumar
Multi-objective
optimization using Taguchi based Grey Relational Analysis for Calmax 635
mould steel through deviation measure
pp.10213-10218
Satyajit Chatterjee, Anindya Das, Rahul Mondal, Nilanjan Dey, Bikash
Bepari
DESIGN AND ANALYSIS OF DEEP
DRAW DIE COMPONENT BY USING HYPERFORM
pp.10219-10224
Mr. Pruthviraj D. Patil, Mr. Dipak S. Patil, Mr. Chetan R. Patil
SENSITIVITY ANALYSIS OF
WIND TURBINE AVAILABILITY AND ITS SUB ASSEMBLIES AT HIGH UNCERTAIN WIND
pp.10225-10229
T.SUNDER SELWYN, R.KESAVAN
Failure Analysis of Turbine
Blade Using Computational Fluid Dynamics
pp.10230-10233
M. Ramachandran,Benildus,
Increasing Efficiency of a
Wind Turbine Using a Convergent Nozzle in Combination with a Flanged
Diffuser
pp.10234-10240
S.P. Venkatesan, Jai Kumar Soni, Ashish Burugpalli
DESIGN A FUZZY LOGIC
CONTROL STRATEGY OF NANO-HYBRID POWER GENERATION FOR RURAL PRECINCT
pp.10241-10245
S.HEMA LATHA, Dr S.CHANDRA MOHAN
Prediction of Crack
Propagation in Double Cantilever Beam of Carbon Fiber Epoxy Composite
pp.10246-10249
Sushant S Patil,Annamalai. K, Senthilkumar. M
FMECA ANALYSIS OF WIND
TURBINE USING SEVERITY AND OCCURRENCE AT HIGH UNCERTAIN WIND IN INDIA
pp.10250-10253
T.SUNDER SELWYN, R.KESAVAN,
MODELLING OF NANO-HYBRID
POWER GENERATION FOR RURAL ZONE
pp.10254-10256
S.Hemalatha, Dr S.Chandramohan
Tensile behaviour of
SiC/ncsc reinforced Mg nano composite processed through powder
metallurgy route
pp.10257-10262
R.Anish, M.Sivapragash
Dynamic Structure and
Vibration Characteristics Analysis of Single Piece Drive shaft Using FEM
pp.10263-10269
Ashwani Kumar, Rajat Jain, Himanshu Jaiswal, #Pravin P Patil
Dry Sliding Wear behaviour
of B4C Coating on AISI 410 Stainless Steel Deposited by HVOF Spraying
pp.10270-10275
Girisha.K.G, Anil.K.C, Akash, K.V.Sreenivas Rao
EXPERIMENTAL ANALYSIS OF
INCONEL718 MATERIAL USING EDM PROCESS
pp.10276-10282
Purusothaman.M, Tariq Mohammad Choudhury
Study of mechanical
properties of Faded Spheroidal Graphite Iron
pp.10283-10286
Hamritha S, Desai Gowda H S
Determining the Mechanical
Properties of Treated and Untreated Sugarcane Powder and Banana
Reinforced Natural Composite Materials
pp.10287-10291
H.S.Mohan, Akash,, T.P.Bharathesh, K.V.Sreenivas Rao
INFLUENCE OF REINFORCEMENT
PARTICULATE SIZE AND WEIGHT FRACTION ON THE WEAR PROPERTIES OF CHILL
CAST Al-B4C COMPOSITES
pp.10292-10295
Sanman S, K V Sreenivas Rao
Effect of Metal-Mold
Interface Heat Flux on the Tribological Behavior of Aluminum-Boron
Carbide Composites
pp.10296-10300
Sanman S, K V Sreenivas Rao, P Usha
Need of Multi criteria
decision making in Vendor Selection for the Automobile Industry.
pp.10301-10304
Sudarshan Lodha, M. Ramachandran
Analysis of Environmental
Impact on Remanufacturing in Electrical Industry
pp.10305-10308
Vishal fegade, Dr. A.V. Kale, Dr. R. L. Shrivatsava
DESIGN AND DEVELOPMENT OF
THREE-DIMENSIONAL SCAFFOLDS FOR BIOMEDICAL APPLICATION BY RAPID
PROTOTYPING
pp.10309-10316
Sarange Shreepad, Warkhedkar Ravi M
Design and Development of
Utensils Washer
pp.10317-10320
Sagar P. Jamode, Sachin T. Bagde
ANALYSIS AND OPTIMIZATION
OF CNC PROCESS PARAMETERS USING TAGUCHI AND REGRESSION ANALYSIS
pp.10321-10323
Ananya Sharma, Shubham Kumar Singh, Zeba Zoariah Ahsan, Ishwer Shivakoti
Development and
characterization of fibre reinforced material based on potato starch and
jute fibre
pp.10324-10327
Malvika Sharma, M. Ramachandran
“Identification and
Evaluation of Critical Factors for Performance Improvement for
Remanufacturing Industry”-A Pilot Study
pp.10328-10335
Amol D. Lokhande, Prof. Dr. R. L. Shrivastava, Prof. Dr. Rashmi R
Surface Finish Generated in
Turning of Medium Carbon Steel Parts Using Adhesive Bonded Tools
pp.10336-10340
Shrikant R. Jachak, Dr. G K. Awari
Energy and Water
Consumption Analysis of Washing Process in a Fully Automatic Washing
Machine
pp.10341-10344
Beemkumar. N, Jason Abu Mathews
A Case Study of JIT System
in the Manufacturing Industry
pp.10345-10351
Swapnil S Dange, Prof. Prashant N. Shende, Chetan S Sethia
Study of Total Productive
Maintenance and its Implementing Approach in Steel Rolling Mill Industry
- A case study
pp.10352-10357
Chetan S Sethia, Prof. Prashant N. Shende, Swapnil S Dange
The Stress Analysis of
Involute Spur Gear under Static Loading
pp.10358-10361
Sarfraz Ali N. Quadri Dhananjay R. Dolas
Combustion and Performance
Characteristics of CSOME Biodiesel
pp.10362-10366
Mr. Bhojraj N. Kale. Dr.S.V.Prayagi
Study of Important Elements
in Remanufacturing for Sustainable Development
pp.10367-10371
Ashish Yerunkar, Dr. Ravi Terkar
Prediction of Contact
Pressure in Deep Drawing Process by FEM
10372-10376
Ajay Kumar Choubey, Geeta Agnihotri, C. Sasikumar, Rashmi Dwivedi
Implementation of Total
Productive Maintenance at Sanvijay Rolling Mill
pp.10377-10382
Prashant.N.Shende, Preeti.H.Narnaware
Forming of Aluminum and
Brass Cylindrical Cups - Numerical Investigation
pp.10383-10386
Rashmi Dwivedi, Geeta Agnihotri, Ajay Kumar Choubey
Analysis of mechanical
properties of glass and carbon fiber reinforced polymer material
pp.10387-10391
D.Bino prince raja, B. Stanly Jones Retnam, M. Ramachandran, M.
Sivapragash
Mechanical Characterization
of jute fiber over glass and carbon fiber reinforced polymer composites
pp.10392-10396
P. Pradeep, J. Edwin Raja Dhas, M. Ramachandran, B Stanly Jones Retnam
Comparing Clustering
Techniques For Gene Expression Data Analysis
pp.10397-10399
M.Ramachandro, Dr.R.Bhramaramba
Characterization of Ni-Cu-P
ternary electroless coating using AFM and SEM
pp.10400-10404
1Jhumpa De, Nisantika Biswas, Rajat S. Sen, Gautam Majumder
BIOMECHANICS - REVERSE
ENGINEERING OF HUMAN BONES FOR MEDICAL APPLICATIONS
pp10405-10409
G. Mageshwaran, S.K.Ramkumar Raja, V. Sriram
Review on Hybrid
Aluminium-based Coated Ceramics Matrix Composites
pp10410-10414
M. Sangeetha, Mechanical and production, M. R.Surendran, Mechanical and
production,
ANALYSIS OF HARDNESS OF
POLYUREA COATED ON MILD STEEL WITH EFFECT TO FUEL ABSORPTION
pp.10415-10418
Arunkumar.T, S.Ramachandran, C Vipin Raj,Ashwin J
A Review on Modelling and
Optimization of Machining Characteristics of Composites
pp.10419-10424
T.N.Valarmathi, S.Sekar, K.Palanikumar
Study of Modal Analysis and
Testing of Hexagonal Honeycomb Plates
pp.10425-10428
Yash Parikh, Pranav Mahamuni
A Novel Design of a Petite
Vapour Compression Refrigeration System (VCRS) for Computer System Unit
pp.10429-10433
J.Parthipan, Dr.B.Nagalingeswara Raju
Modelling Analysis of
Thermal Energy Storage system using Paraffin wax
10434-10439
B. Kanimozhi, Dharmendtra thagur, Cawin.R, Upendra
Fabrication of Aluminium
Fly ash metal matrix composite with activated carbon and
characterization of mechanical properties
pp.10440-10444
M.S.Aldrin Sugin, Vaddi Seshagiri Rao
Optimization of the
Parameters to Obtain High Performance in Wing Model with Bird Feather
like Winglet
pp.10445-10447
E.V.V.Ramanamurthy, Nishant Gaurav, Abhiyan Paudel, Jasleen
INTER PLY STRESS ANALYSIS
OF BASALT FIBRE REINFORCED PLASTIC LAMINATED COMPOSITES
pp.10448-10450
Alexander, Dr.BSM .Augustine
Design and FEA analysis of
a light weight chassis frame for safe electric karts and go karts
pp10451-10456
Rajat Jain, Saurabhkumar, Himanshu Pandey,Devendra Singh Bisht, #Pravin
P Patil
FABRICATION AND
INVESTIGATION ON MECHANICAL PROPERTIES OF CARBON FIBER REINFORCED IN
EPOXY LY556 COMPOSITE MATERIAL
pp10457-10461
S.Sivasaravanan, kodali Sai Teja, Harish Ponsingh, Camillus
Internet Based Home
Automation Using Raspberry Pi
pp.10462-10466
Vivek Yerubandi, Vinod Maddigatla, Praveen Gowtham
Design and modification of
inlets for hypersonic scramjet engine
pp.10467-10470
S.Senthil Velavan, J.Alexander
Performance and combustion
characteristics test on VCR diesel engine
pp10471-10473
Gopinath.S, Bibin.C, Devan.P.K, Balasubramanian.M
Development of a Prediction
Model for Optimized Surface Roughness in Face Milling Operation Using
Recurrent Neural Network Technique
pp.10474-10480
KarthikRao, Rashmi L Malaghan, ArunKumar S, Shrikantha S Rao
Innovative Models in
Teaching–Learning Techniques for Engineering as a Techno-Management
Course
pp.10481-10485
Prof. Payal Rahul Dande, Ashutosh Ajgaonkar Parkhi Tyagi
Buy/Make decision making
framework for pump product development with multi criteria decision
making
pp.10486-10489
Mayank Jain, M. Ramachandran
Challenges in making of
Basic 3D Printer concept
pp.10490-10496
Mrudul Banka , Pranshu Mishra ,Chirag Atul, Sudhir Chaurey
ON THE STEADY-STATE
PERFORMANCE ANALYSIS OF FINITE HYDRODYNAMIC POROUS JOURNAL BEARING
LUBRICATED WITH COUPLED STRESS FLUID
pp.10497-10501
R. Ghadai, S. Some, S. Diyaley, S. Das ,Kanak Kalita
Comparison of interface
stress-strain analysis of molar teeth with solid and porous dental
implant
pp.10502-10506
M. Das, R G Talukdar, K. Bhowmik, S. Roy, S. Majumder
Emission Analysis on a Two
stroke Hybrid Hydrogen-LPG IC Engine
pp.10507-10510
Jayaprabakar.J, Beem kumar.N,Amith kishore.P
Optimization of Solid
UHMWPE with porosity as an cervical disc implant
pp.10511-10515
R G Talukdar,M Das, S Majumder, A Roychowdhury
ANALYSIS OF HOLLOW HELICAL
SPRING UNDER COMPRESSION-A REVIEW
pp.10516-10521
Achintya Saraswat, Chitra Ojha, Vishal Fegade, Praveen Kumar, Loharkar
Modular Fixture Design
Methodology for CNC Turning Machine
pp.10522-10526
Sonal Maykalwar, Dr. A. V. Kale
Teaching Methodologies for
Upcoming Generations of Technical Education
pp.10527-10529
R.Devaraj,
Methodology of Modular
Fixture Design for CNC Milling Machine
pp.10530-10538
Dr. A. V. Kale, Pooja Mehre
A review on introduction of
FEM simulation in multi-stage forming of wheel disk
pp.10539-10542
Rohit S. Birajdar, Prashant D. Kamble
Ancient Mathematics
Application in Comparison of Performance of Multipliers
pp.10543-10547
V.J.K.Kishor Sonti, Prescilla Jemima.G
Methodology for Databased
Computer Aided Fixture Design
pp.10548-10556
Dr. A. V. Kale, Sonam.A.Jain
Design and Development of
Dies for an Industrial part – A Review
pp.10557-10559
Vivek D. Barhate, Sachin G. Mahakalkar, Dr. A. V. Kale
A Review on Soil Ejecting
Techniques in Excavator Buckets
pp.10560-10564
Mr. Abhay K. Pande, Dr. Rajkumar B. Chadge, Mr. Sachin Kharat
A review on
Biodegradability of Hybrid Bamboo/Glass fiber polymer composites
pp.10565-10569
Alex.S, Dr.Stanly Johns Retnam, M. Ramachandran
Need of Bhagavad Gita
Concepts in the Present Scenario of Professional Education
pp.10570-10574
Bhavna Sharma, M. Ramachandran
A review on Development of a Three Axis Modern pneumatic Trailer
applicable to shipping industry
pp.10575-10579
M. Ramachandran, V. Aji,
Influence of Tolerance
Stack-Up on Mechanism Dynamics: Review
pp.10580-10587
Chandrashekhar Akhadkar, Ashish Deoghare, A M Vaidya
A Review on Crack
Detection Techniques in Rotating Shaft
pp.10588-10590
Gaurav S. Chaure, Deven Y. Shahare
A Systematic Review on
Experimental, FEM Analysis and Simulation of Metal Spinning Process
pp.10591-10595
Amol M. Jadhav, Prof. Sharad S. Chaudhari, Prof.S. S Khedkar
Modeling and Analysis of
Product Design and Development Process with Perspective of
Remanufacturing: A Review
pp.10596-10602
Harshal Fulari, Vishal Fegade,
Aero elastic Behavior of
Rectangular Composite wing with Winglet
10603-10608
Maheshkumar Chinnamsetti
Multiple Response
Optimizations in Milling Using Taguchi and Grey Relational Analysis
pp.10609-10613
Rashmi L Malghan, Karthik Rao M C, Arunkumar, Dr.Shrikantha S Rao, Dr.R
J D’Souza
Gearbox Design
Optimization by an Evolutionary Algorithm
pp.10614-10617
S.Padmanabhan, D.Vinoth, S.Thommai Thasnevis Gausanar
Prediction of Process
Parameter in Dissimilar Material by using Friction Welding
pp.10618-10621
Shanjeevi.C and Abinash Sarma, Satish Kumar.S, Sathiya.P
Multi-Objective
Optimization of Bevel Gear design using Immune System Algorithm
pp.10622-10624
S.Padmanabhan, Adil Ahamed. Amil Ajith
OPTIMIZATION OF WEAR
BEHAVIOUR IN ALUMINIUM REINFORCED BORON CARBIDE COMPOSITE USING TAGUCHI
TECHNIQUE
pp.10625-10628
K.S.Sridhar Raja,
An Approach to the Laser
ignition system in Internal Combustion Engine
pp,10629-10636
Shubham Mandwale
A Review on Implementation
of Minimum Quantity Lubrication (MQL) Technique in various machining
processes.
pp.10637-10641
R. R. Shimpi, S. B. Chandgude
Productivity Improvement
with Sewing Machine Attachment
10624-10648
Harshada Upasani, Pranjali Chandurkar, Dipaksingh Girase,Vishnu Dorugade
EFFECT OF SOLVENTS ON HT
DYEING OF POLYESTER
10649-10657
Dr. Vishnu Appa Dorugade
INNOVATIONS IN REACTIVE
DYES
pp.10558-10666
Miss. Gayatri Patil, Miss. Nimisha Baheti, Dr. Vishnu Dorugade