DIGITAL LOCKING SYSTEM FOR TWO WHEELER
pp.1-5
A.Abdul Kalil, R.Ajith Kumar, A.Arun Kumar, M.Dhayanithi and M.Dinesh

VERTICAL AXIS WIND TURBINE
pp.6-9
Syed Riyaz M, Udhayapriyan J, Rajesh Kumar R, Balamurugan S and Jeeva V

PNEUMATIC BUMPER
pp.10-15
Antony Raj, T.T.Arjun, C.Avinash, D.Balachandar and K.Balaji

Power Generation Using Shock Absorber
pp.15-21
C. Arun Kumar, M. Boobalan,N.Dhenesh Kumar, G.Hari Baskar and P.Hari Haran

Performance of wire electrodes on machining of hybrid Aluminium composite
pp.22-29
D.Anandan, Dinesh Aravind, K.Dhanraj, R.Abinesh and P.Barathkumar

Cutting speed Optimization for hybrid Aluminium composite in WEDM process by using Taguchi method
pp.30-37 
K.Aniiruth, S.Harish, Mohammed Saleem and S.Boobalan,

Fabrication of hybrid Aluminium composite using stir casting method
pp.38-43
B.Vamsikrishna, RG.Charankumar, G.Ramakrishna, A.Rathish and B.Venkatsurya

Experimental investigation of kerf width in WEDM process for hybrid Aluminium composite using Zinc coated Brass wire
pp.44-52
G.Saikrishna, T.Chandu, C.Lokeshkumar, G.Naveenkumar and G.Sharathkumar

Fabrication of Solar Seed Dryer
pp.53-62
B.Bhanu Prasad, A, Mohammadrafi, B.Ravikumar, A.Rahiman and B.Mallikarjunrao

HYDRAULIC & PNEUMATIC VICE AND JACK
pp.63-65
Anandavignesh M, Aashik M S, Ajay A P and Ajithkumar.P

Automatic Railway Gate Control Using Vibrating Sensor
pp.66-73
Deepak Kumar, Abhishek Warrier, C.Gugan, K.Dinesh and Benjamin Franklin

ANTI-THEFT FUEL SUPPLY SYSTEM FOR AUTOMOBILES
pp.74-80
P.Mahesh Babu, P.Kamalakar Chaithanya, K.Lokanath Reddy, S.Christopher

AUTOMATIC SEWAGE CLEANING MACHINE
pp.81-84
V.M.MD.Nawaz Sherief, R.Naveen Kumar, J.John Ebenezer, S.Karrthikeyan and M.Muthukumar

COMPOUND GEAR CYCLE
pp.85-88
Madhu Balan.J, Pavithran.A, Lakshmi Narayanan.R and Mudassar Mahmood.A

FABRICATION OF EMERGENCY BRAKING SYSTEM
pp.89-92
Manoj Kumar.S, Jaya Kumar.K, Madhan Raj.K.K, Karthick.M and Iniyavan.J

FINNED VESSEL
pp.93-96
Madhu Balan.J, Pavithran.A, Lakshmi Narayanan.R and Mudassar Mahmood.A

MAGNETIC BRAKING SYSTEM IN LOCOMOTIVES
pp.97-99
Mohamed Riyaz.S, Javthath Ahamed.M, Murugesh.R, Mohan raj.G, Karthik.S and Karthikeyan.S

PNEUMATIC MULTI-PURPOSE MACHINE
pp.100-103
Mohan Kumar S, Pravin Prasanna N, Narendhran P, Haris Gowtham G J, Lokesh.B and P.Ravishankar

THERMOELECTRIC AIR COOLER
pp.104-107
R.Krishnaraj, Nunnakarthik, R.Kumaresan, Lingininagamanoj, R.Murali and A.Karthik

DESIGN AND ANALYSIS OF ROLL CAGE FOR ATV
pp.108-115
Karthickraja, KP Harish Kumar, Jaymin Kataria and A.Muniappan

MULTI SLOTTING MACHINE
pp.116-119
M. Vijay Vardhan Reddy, P. PrudhviSai Reddy, K.ChaitanyaKumar, E. Hemanth kumar and P.Manikanteshwar

FABRICATION OF MULTIBOLT REMOVER
pp.120-125
K.Kaushik, S.Jaivignesh and M.Hussain Basha

DESIGN AND FABRICATION OF THERMOELECTRIC GENERATOR FOR SWIRL GAS STOVE 
pp.126-129
R.Mahenthiran, R.Muniraj, T.Muthuraman and V.Nirmalraj

Fabrication of Automatic Headlight Dimmer System
pp.130-135
Richard Sen, Remin V, Subro Routh, S and Vamshi Krishna

DUAL UTILIZATION OF PUMP MOTOR
136-139
SooryaPrakash .R, Srikumar.B, Srinivasan .J, Subramani .M and S. Christopher,

PNEUMATIC BASED BUMPER SYSTEM TO AVOID COLLISION FOR AUTOMOBILES 
pp.140-143
R.ShenbagaPandian, K.Shanmugam, T.Sathyan, R.Paventhan and Daniel Raj

SEMI-AUTOMATIC SEEDS TRANSPLANTER WITH FERTILIZER
pp.144-147
Sarath.K, Prabakaran.S, Pravin Raj.R, Ram Prakash.E and Pandiyan.A

FABRICATION OF SEMI-AUTOMATIC PLASTIC INJECTION MOULDING MACHINE
pp.148-154
S.Ponnarasu, M.Prashanth, R.Praveen, R.Razikh Farid and Pandiyan.A

Design And Fabrication of Two Stroke Compressed Air Engine
pp.155-160
R.Vishnu Vardhan Reddy, Ch.Raghuma Reddy and Shubham Sharma

Experimental Setup for Water Purifier Using Solar Power
pp.161-164
Sathis kumar A, Sridharan N, Pradeep B J,Saifullah sheriff K Z, Sheik Abdulkader K and Sivananthan.S

Assessment of NaturalBonding in Banana Leaf Composite Material
pp.165-168
Prakash M, Rajesh R, Ranjith Kumar S, Ranjith C, Saravanan N and Yadava Kumar.

Design And Fabrication Of MINI LATHE
pp.169-172
P. Naga Vamsi, .Sameer, G. Sandeep Kumar, S. Lal Basha, Singamsetty. Gowtham and S .Christopher,

Advanced Design and Fabrication of Pneumatic Sheet Metal Bending Machine
pp.173-177
M.Revanth, K.Prabu, C.Premkumar, Santhoshkumar and S. Dineshkumar

Design and fabrication of vice through Square Gear
pp.178-180
Raj narayanan V, Rajesh R, Raj kumar S, Santhoshkumar S, and Sivasubramaniam. A

DESIGN AND FABRICATION OF ROD BENDING AND ROD BEND REMOVAL MACHINE THROUGH HYDRAULIC SYSTEM
pp.181-183
Ragul, Pugazhendhi and Sanjeev raj,

MULTIPURPOSE MILEAGE INDICATOR
pp.184-189
Thanveer Ahmed. F, Vivin chandar.V, Thirumurugan.S, Sathish.C, Chaitanya reddy.Y and Dinesh kumar.S, J Paul James Thadhani

FABRICTION OF PEDAL BASED DISH WASHING MACHINE
pp.190-194
Atla Naresh, KeshavaReddy.P, A.L. Krishna Prasad, Arun Kumar.V, Harsh Vardhan.G and S. Sivanandhan

FABRICATION OF AUTOMATIC DIFFERENTIAL UNIT LOCKING SYSTEM
pp.195-198
Karthik.A, Vijayaragavan.S, Suriya Narayanan.S, Venkatesh.R, Manikandan.H, Azariah Pravin Kumar and Vasan.S, Sundar.D 

Analysis of Multi-channel Water flow Room Cooler
pp.199205
Rahulkumar, R.Thamilselvan, Yuvaraj.D, P.SaiLakshman, Ashkar Ali, VenketRaghul and Baranitambachyavaradarajan.N

PEDAL OPERATING CLUTCH SYSTEM
pp.206-210
Ajay Krishna.S, Syed imran, Vignesh K.M, Vignesh.S, Vigneshvaran.J, Vigneshwaran.S and M. Bharaneedharan

Standardization & Repositioning of Air Chamber in Brake System
pp.211-217
Avinash.S, Balaraman.A, Faizal Ahamed.N, Karthikeyan.R

Analysis Of Single Stage Axial Flow Compressor By Varying The Axial Gap
pp.218-222
Ahamed.M, Aswin.A, Badrivishal.B, Jayapal.M, Kiron Antony and Karthikeyan.S

CFD ANALYSIS OFGAS TURBINE BLADE
pp.223-229
M.Disho John, V.Ganesan and Ajay John Paul.

NOISE DEDUCTION AND CONTROL IN COUNTERSHAFT
pp.230-235
Hemnath D, Kaleeswaran M, Karthick S, Syed Abuthahir K and Anoop Jhonny

DESIGN AND ANALYSIS OF CONNECTING ROD USING COMPOSITE MATERIALS
pp.236-241
K.Bharath Kumar, Bibin George Thomas, Paul James Thadhani and A.Pandiyan

DEFECT ANALYSIS IN PAINT SHOP
pp.242-254
AsthalienA, Aravinth A, Arshadbasha J, Gowtham S, Jude Shelley and Barani tambachyavaradarajan.N

STATIC STRUCTURAL ANALYSIS OF AIRCRAFT FUSELAGE BODY STRUCTURE BY USING COMPOSITE MATERIAL
pp.255-261
Deepak.S, Alwin.P, Dinesh Kumar .C.M, Boobalan.D, Deventharan.D and Sivasubramaniyan.A

CFD ANALYSIS OF CYCLONE SEPARATOR AND THE EFFECTS OF VELOCITY AND PRESSURE
pp.262-268
P. Kumaran, B. Satya Krishna, S. Dineshkumar and Paul James Thadhani

Experimental Investigation of Process Parameters on Machining of Hybrid Aluminium Composite using Zinc Coated Brass Wire
pp.269-278
A.Muniappan, C.Thiagarajan and S.Somasundram
[UP]

© All rights are reserved with Research India Publications                             Home  Journals  Contact