Volume
10, Number 7 (2015) Special Issues
CONTENTS
DESIGN AND ANALYSIS OF DRAG
FORCE AND FUEL CONSUMPTION IN SMALL VEHICLES USING CFD
pp.5792-5796
S.Rajendran, K.Purushothaman and
M.Ravi
MODELING AND SIMULATION OF
THE THERMAL CONDUCTIVITY OF THE ECO-FRIENDLY BRAKE PADS
pp.5797-5799
S.Jeyanthi, J.Jancirani,
T.Vignesh
Experimental Investigation
on Spray Characteristics of Diesel, Biodiesel and its blends by Varying
Chamber Pressure
pp.5800-5802
P.Raghu, N.Nallusamy, A.Devaraj,
N.Srihari, T.Sakthidasan
Influence of Cutting
Parameters on Thrust Force And Torque in Drilling of Duplex Stainless
Steel
pp.5803-5809
N.Sathish, T.Nithyanandam
Optimization of machining
parameters in Al-Ti composite developed using stir casting
pp.5810-5813
J.Godwin, Z.Edward Kennedy,
Zubaida kathoon Bee
Experimental Investigation
of Diesel-Biodiesel-Ethanol Blends In CI Engines
pp.5814-5821
Mr.Gopinathan, Dr.Arul Shri K.P,
Dr.Shanmugasundaram, Mr.Saravana Kumar M
Study of Machining Behavior
of AlN Coated Insert on Brass
pp.5822-5827
K.Naveenchander, P.Sasikumar,
A.Saravanakumar, S.Pavithran[
Performance Review of Disc
Brake Judder Using Finite Element Analysis
pp.5828-5830
Mr. T.Varun Kumar, S.Vigneshwaran,
K.Vijayakumar, T. Pradeepan and G.Suresh
faEXERGY ANALYSIS IN IC
ENGINE USING DIESEL BLENDS AS A FUEL
pp.5831-5836
BASKARAN S, VENKADESH S
Optimization of drilling
process parameters using Taguchi method
pp.5837-5839
A. Saravanakumar, P.Sasikumar,
N.Nilavu sri
Multi-Response Optimization
of Wear properties of Hybrid Composite Using Grey Relational Analysis
pp.5840-5843
A. Saravanakumar, P.sasikumar, P.T.
Harisagar, N. Balachandar, M. Kavin
CONVERSION OF EXHAUST CO2
INTO USEFUL CHEMICALS
pp.5844-5849
M.Elango, S.Sathish, P.Gowtham
Analysis and modeling the
effect of Fiber orientation on shear stress of GFRP composites
pp.5850-5853
M.Elango, Paruchuri Sai Tej, M.Mahesh
Multi Robot Coordination in
a Homogeneous Team with charge awareness
pp.5854-5857
M. R. Madhumitha, M. Elango
Wear Behaviour of Al-8011
and Al- Ni- SiC Metal Matrix Composites
pp.5858-5862
S. Vishnu Priya, Arun Prakash.J, Vishnu.V, Christin Gnana Divahar.J
OPTIMIZATION OF MACHINING
PARAMETERS OF Al-SiC NANO COMPOSITES USING DOE AND RESPONSE SURFACE
METHOD
pp.5863-5869
S.Vijayraj, A.Arivazhagan , G.Prakash ,
G.Prahbu
Handover in WLAN-Mobile
network using Genetic algorithm
pp.5870-5877
B. Jaiganesh, Monica. I, P.C.Kishore
Raja
OPTIMIZED DESIGN AND
ANALYSIS OF FULL ADDER USING REVERSIBLE LOGIC GATES USING HDL
pp.5878-5881
A.RAM KUMAR, P.JAGADEESH, E.THENMOZHI
RAMYAH
Fault Detection Schemes for
the Advanced Encryption Standard
pp.5882-5886
P.Jagadeesh, E. Thenmozhi Ramyah, A.
Ram Kumar
ANALYSIS OF DIGITAL
COMPARATOR USING PROGRAMMABLE TRIGGERING LEVELS
pp.5887-5890
B.SaiKiran , B.Harinath Reddy,
D.Balachandra Reddy, S.Gomathy, P.Dass
Conceptualizationof
Identityand AccessManagement
pp.5891-5893
Radhakrishnan Subramanian