Volume 10, Number 8  (2015)   Special Issues

CONTENTS

USE OF ANALYTIC HIERARCHY PROCESS (AHP) TO SELECT WELDING PROCESS IN HIGH PRESSURE VESSEL MANUFACTURING ENVIRONMENT
pp.5869-5884
Arvind Jayant, Mandeep Singh

A Case Study on Multi-Objective Optimization in Machining: Deng’s Similarity Based Approach
pp.5885-5889
Bedamati Nayak, Kumar Abhishek, Saurav Datta, and Siba Sankar Mahapatra

Optimal machining conditions for Precision turning Ti-6Al-4V using Response Taguchi-Fuzzy Inference System
pp.5890-5894
R. Vinayagamoorthy, Saravanan Lakshmanan M. Anthony Xavior

Investigation of Chip Morphology, Cutting Force And Tool Wear In Precision Turning Process Of Ti-6al-4v Alloy
pp.5895-5899
R. Vinayagamoorthy , Saravanan Lakshmanan, M. Anthony Xavior

Study of Friction Performance of Electroless Ni-P Coatings in Brine Solution and Optimization of Coating Parameters
pp.5900-5904
Bikash Panja and Prasanta Sahoo

Real time Implementation using Neural Network Based controller for Spherical Tank Process
pp.5905-5909
Deepa Thangavelusamy, Lakshmi Ponnusamy

Experimental Study and Optimization of Process Parameters on Thrust Force Based on Taguchi and ANOVA During Drilling of GFRP Polymeric Composites Manufactured by Pultrusion Method
pp.5910-5915
B. RAMESH1, A. ELAYAPERUMAL AND S. SATISHKUMAR

Energy extended stable route selection in on demand multicast routing algorithm
pp.5916-5922
Rajendiran.M., Srivatsa.S.K.

Effect of Stacking Sequence and Aspect Ratio of Laminated Composite Plate on Buckling Strength
pp.5923-5927
P. Emmanuel Nicholas, K.P.Padmanaban and I Joseph Selvaraj

Investigation on the Influence of Tool Geometry on Surface Roughness during Hard Turning Process
pp.5928-5932
Praveen Gowtham S and Anthony Xavior M

Simulation of Conventional Cooling Systems Retrofitted with Vapour Absorption Refrigeration for Food Preservation in Remote Villages
pp.5933-5937
M. EDWIN1and S. JOSEPH SEKHAR

Combustion Characteristics of Variable Compression Ratio Engine Fuelled with Biodiesel
pp.5938-5942
M.Santhosh, K.P.Padmanaban

Experimental study on spray characteristics of biodiesel and diesel under ambient temperature conditions
pp.5943-5947
RAGHU.P, NALLUSAMY.N, PITCHANDI.K

Experimental Investigation of Mount Vibration Displacement in the Diesel Engine
pp.5948-5951
T. RAMACHANDRAN, K.P.PADMANABAN, M.UTHAYAKUMAR

Multi-objective Optimization using Taguchi based Grey Relational Analysis for WEDM of Aluminium Matrix Composites (A356/B4Cp)

pp.5950-5954

J.Udaya Prakash, T.V.Moorthy

Optimization of Electro Discharge Machining Parameters Using Ant Colony Algorithm
pp.5955-5958
M Prabu , G Ramadoss, C Senthilkumar , P Senthilkumar and R Boopathi

A literature review on various design parameters in high speed spindles
pp.5959-5963
B.BRAILSON MANSINGH, P.KARUPPUSWAMY

Investigation of Aluminum Based Metal Matrix Composite on Microstructure
pp.5964-5967
A. SARAVANAPANDISOLAIRAJAN,S.ALEXRAJ, P.GANESH KUMAR, P.VIJAYA RAJAN

Experimental study on diesel engine to analyse the spray characteristics of biodiesel by varying injection pressure
pp.5968-5971
M.Senthamil Selvan, P.Raghu and N.Nallusamy

Optimization of electrical discharge alloying parameters using RSM
pp.5972-5975
C.Senthilkumar, G.Ganesan, S.Manikandan, K.Pandiyan, K.Ponnienselvan

Multiobjective Optimization of Nano Powder Mixed Electrical Discharge Machining of Inconel 718
pp.5976-5979
R.BOOPATHI, S.SUNDARAM , C.SENTHILKUMAR and M.PRABU

Designing and Conducting Experiments for Optimization of satisfactory Cutting conditions in Precision Turning by using Titanium Alloy
pp.5980-5984
Jainesh shah Eashan dhawade R. Vinayagamoorthy Saravanan Lakshmanan M. Anthony Xavior

Optimization of Process Parameters of Nickel Electroplating Process
pp.5985-5989
J.Prasanna, S.Siva, E.Premnath, R.TamilSelvan, Lakshmi Narashiman Aswin

Optimization of Friction Welding in dissimilar materials through Taguchi based Grey Relational Analysis
pp.5990-5995
Shanjeevi.C, Satish Kumar.S , Sathiya.P, Santonu Gorai

Influence of tool pin profile on wear behavior of dissimilar friction stir welded aluminum alloys
pp.5996-6000
R.Palanivel, M.Balakrishnan, M.Prasanna, I.Dinaharan, N.Murugan,

Effect Of Cutting Parameters On Chip Formation And Tool Wear In Precision Turning
pp.6001-6005
K.Vamsi krishana, A.Siva Theja R. Vinayagamoorthy , Saravanan Lakshmanan M. Anthony Xavior

Densification of machined CP Al chips by Equal Channel Angular Pressing (ECAP)
pp.6006-6010
S.Vigneshwaran, P.Venkatachalam, P. Rajesh, S. Kumaran and B. Ravisankar

Experimental and Numerical Investigation of the Flexural properties of Thick Laminated Hybrid Composites
pp.6011-6014
R.Selvam, L.Karunamoorthy and N.Arunkumar

Harmonic Control of Nano-Hybrid Power Generation for Rural Zone
pp.6015-6020
S.Hemalatha, Dr S.Chandramohan

PERFORMANCE COMPARISON OF TRADITIONAL AND VEDIC METHOD OF POLYNOMIAL DIVISION
pp.6021-6026
K.V.Karthikeyan, V.J.K.Kishor Sonti, S.K.Binu Siva Singh

Role of Micro-Textures on the Improvement of Wear Resistance in Cutting Tool Material
pp.6027-6029
M.G. HARI PRASATH, V. SENTHILKUMAR

Sensitivity based Optimal Location of FACTS device using GAOPF
pp.6030-6034
Manikandan.S , Arul.P

Numerical Modeling of Through-wall Crack in Pipe Bend using EFGM
pp.6035-6041
Kamal Sharma, I.V. Singh, B.K. Mishra, Vivek Bhasin1 & R.K. Singh

Optimization of High Velocity Oxy Fuel spray parameters to deposit Titanium di-Oxide (TiO2) coating by Response Surface Methodology
pp.6042-6045
R.Sathiyamoorthy, K.Shanmugam and V.Balasubramanian

Brain Tumor Segmentation Based Back Propagation Neural Network
pp.6046-6050
V. Amsaveni, N. Albert Singh, V.Ajan Babu

Effect of heat treatment on thermal cycled Titanium (Ti-6Al-4V) alloy
pp.6051-6055
S. MANIKANDAN AND S. RAMANATHAN

Intelligent Modeling of ECM Process Parameters for B4C reinforced AA6061 MMC
pp.6056 6060
T. M. ChenthilJegan, D. Ravindran and M. Dev Anand

Sensitivity Based Optimization with FACTS Devices Using Soft Computing Techniques
pp.6061-6064
Karthik.MArul.P

Effects of tool pin profile and material location on tensile behavior in friction stir welding of dissimilar aluminum alloys
pp.6065-6069
T.Muthu Krishnan, R.Palanivel, B.Ganeshbabu, I.Dinakaran, N.Murugan

PERFORMANCE ANALYSIS OF A SOLAR CAVITY COLLECTOR
pp.6070-6073
B. Lakshmipathy, and B. Sivaraman

An experimental investigation on thermal performance of parabolic trough collector using bifacial absorber
pp.6074-6077
A. Kajavali, and B. Sivaraman

Multi-response Optimization of Machining Parameters of Turning AISI 6061 T6 Aluminium Alloy Using Grey Relational Analysis In Taguchi Method
pp.6078-6083
P. Jayaraman, L. Mahesh Kumar

Wireless Power Transmission system for Electric vehicle
pp.6084-6087
J. R. Jenish, P. Jagatheeswari, M. Mary Linda

Effect Of Re-entrant Combustion Chamber On Single Cylinder Direct Injection Four Stroke Diesel Engine
pp.6088-6092
A.K.Boobalasenthilraj, S.Premnath, K.Pitchandi, G.Devaradjane

AN EXPERIMENTAL STUDY OF DRILLING OF CARBON-CARBON COMPOSITE MATERIAL
pp.6093-6098
K.V.KRISHNA SASTRY, V.SESHAGIRI RAO

Neem Oil as Biodiesel for Compression Ignition Diesel Engine
pp.6099-6103
Narendranathan.S.K, K.Sudhagar

Modelling of Molar Tooth and Its Behaviour under the Impact of Abrasive Jet
pp.6104-6106
N. Rajesh Jesudoss Hynes, J. Angela Jennifa Sujana, K. Sabari Kailash, A. Simson Rajapaul, K. Vinodh Babu

Prediction of Thermal Profile during Friction Stud Welding of Aluminium - Mild Steel Joints
pp.6107-6110
N. Rajesh Jesudoss Hynes, P. Nagaraj, R. Tharmaraj,

Rollover Analysis of Chassis type Bus Body Structure
pp.6111-6116
P.D.Jeyakumar , G. Devaradjane G. M. Sherin Lal , S. Ramkumar

Effect of Changing Height Ratios of Cylinder to Cone on Performance of Industrial Gas Cyclone Dust Separator
pp.6117-6121
K. VAISH1, L.S. BRAR, A.K. ROY, ANDR.P. Sharma

Three Dimensional Motion Parameter Estimation from Consecutive Perspective Views of Rigid Planar Patch: Algorithm based on Pure Parameters and Singular Value Decomposition and Implementation
pp.6122-6128
Venkatesh.S.S1,a, Anil Kumar.A.K, Deepak Mishra, Ramarao Nidamanuri and Karthikesan.D

Comparison Of The Effect Of Alumina And AlCrN Coatings On The Oxidation Behaviour Of 6061 Al/SiCP Composite
pp.6129-6132
S.Rajasekaran, S.Selvam, Jagannath Nayak, N.K.Udayashankar

Design, Fabrication and Testing of Regenerative Shock Absorber (Linear Alternator Type)
pp.6133-6137
S.Gopalakannan, S. Praveen Kumar, V.Premsagar, T.R.Pradeep

IMPLEMENTATION OF ARTIFICIAL NEURAL NETWORK IN ANALYSING SUPPLY CHAIN FOR SINGLE RETAILER AND MULTIPLE SUPPLIERS
pp.6138-6142
J.Ralph Leeben, M.Saravanan, and S.Purushothaman

Linear Regression Model Of Corrosion Behavior Of 6061 Al/SiCP Composite With And Without Protective Coating
pp.6143-6146
S.Bhavani, S.Rajasekaran, S.Selvam, Jagannath Nayak, N.K.Udayashankar

Measurement and Analysis of Cutting Forces and Temperature During Precision Turning of Titanium Alloys
pp.6147-6151
A.Siva Theja K.Vamsi krishana , R. Vinayagamoorthy, Saravanan Lakshmanan, M. Anthony Xavior

A CFD analysis and simultaneous solution of heat and moisture transfer in a moist object during convective drying
pp.6152-6153
Dr. Chandramohan V.P, Dr. C. Prathap, Dr. Kiran Kumar K, Dr. Prabal Talukdar

IMPLEMENTATION OF SURFACE ROUGHNESS MEASUREMENTS USING WAVELETSWITH BACK PROPAGATION ALGORITHM
pp.6154-6159
RI Ramkumar, R.Subashchandrabose, S.Purushothaman

Path Planning of Mobile Robot Agent Using Integrated Hybrid Algorithms on a Grid Map Based Dynamic Environment
pp.6160-6165
DR. K. SUDHAGAR, M.BALASUBRAMANIAN, G.RAJARAJESWARI

Analysis of producer gas produced in an experimental Downdraft gasifier using shell biomass materials
pp.6166-6169
K.Sivakumar, N.Krishnamohan, B. Sivaraman

Effects of Moisture Content and Die Pressure on ArtocarpusHeterophyllus Leaves Powder Biomass Processing
pp.6170-6173
S.L.Sango, P.Seeni kannan and S.C.Vettivel

Effect of WEDM parameters on machining of Al matrix particulate composite
pp.6174-6181
N.Vinoth Babu , Dr.T.V.Moorthy

Performance of a Parabolic Trough Solar Collector with Twisted-tapes Absorber
pp.6182-6185
K. Syed jafar, and B. Sivaraman

Embedding Error Based Data Hiding in Videos with Distortion Tolerance
pp.6186-6190
R. Ragupathy, K. Seetharamanand M. Saveetha

On the suitability of nanofluid as working fluid in Natural Circulation Loops
pp.6191-6195
Dr. Kiran Kumar K, Dr. Chandramohan V.P. Md. Abdulla Razzack, Ramesh Babu B ,Praveena Devi N.

Simulation and Optimization of Solar Adsorption Refrigeration Techniques
pp.6196-6205
N.SARAVANAN AND R.RATHNASAMY

Investigation of machinability of Graphite particle reinforced Al-MMC
pp.6206-6209
A.Saravanakumar, S.Sivasankara,n and P.Sasikumar

Experimental Investigation on DI Diesel Engine Using Bio Additive
pp.6210-6214
R.Senthilkumar, V.Manieniyan and S. Sivaprakasam

Investigation on influence of resin on Tensile behaviour of glass fibre-siC Polymer Reinforced Composites
pp.6215-6218
S. Rajesh,  B. VijayaRamnath

Development of Mathematical Model for the Transesterification of Jatropha Oil Using Response Surface Methodology
pp.6219-6223
R.R.NEELA RAJAN, Dr.R.RAJESH
 

An Efficient Credence based scheme to fight against Packet Dropping Attack in Mobile Ad hoc Network
pp.6224-6228
S. Madhurikkha, Dr. R. Sabitha

Submerged Friction Stir Welding and Processing: Insights of Other Researchers
pp.6229-6235
C.Rathinasuriyan, Dr.V.S.Senthil Kumar

Multi-characteristics Optimization During Turning of AISI 6061 T6 Aluminium Alloy Using Weighted Principal Component Analysis
pp.6236-6240
P. Jayaraman, L. Mahesh Kumar

A review on Cohesive Zone modeling for analysis of Crack propagation in adhesive joints
pp,6241-6245
M.D.Mohan Gifta, P.Selvakumar, S.John Alexis

Estimation Of Physical, Mechanical and Morphological Properties Of Wood Flour Filled Polypropylene Composite
pp.6246-6250
K Praveen Kumar, Dr. C. Elanchezhian, Dr. B. Vijayaramnath

Resolving the anomaly in n-point asperity model for elastic-plastic contact of rough surfaces
pp.6251-6255
Ajay K. Waghmare, Prasanta Sahoo

Effect of Lubrication on Friction Factor of AA6063 in Forward Extrusion Process
pp.6256-6260
Jayaseelan V, Kalaichelvan K, Elangovan K, Vijay ananth S

An Efficient Security in Wireless Sensor Network against Clone Attack
pp.6261-6265
A.vanitha, Dr.R.Velayutham

EFFECT OF SWEPT BACK ON VERTICAL AXIS WIND TURBINE PERFORMANCE
pp.6266-6268
M.Dhanabalan, K. Srinivasan, and Channankaiah.

Authentication Using String Generated from Chomsky Hierarchy of Formal Grammars
pp.6269-6273
S.Vaithyasubramanian & A.Christy

Vibration Diagnostics for Rotating Machinery using an Expert System
pp.6274-6278
M.Senthil kumar, S.Sendhil kumar

Fusion of Satellite Images Based on Sparse Representation
pp. 6279-6283
V. Vinolin, S. Maria Seraphin Sujitha

Space Vehicle Orientation during Launching
pp.6284-6288
V.A.NAGARAJAN, K. HARI RAM, S.IYYAPPAN

A Classification System for Fused Brain Images using Support Vector Machine
pp.6289-6293
Kavitha S, Thyagharajan K K

Evaluation of Weld Qualityof Self Shielded Flux Cored Arc Welding using Wind Velocity
pp.6294-6297
S.M.Ravikumar, P.Vijian

Analysis of biogas generation from solid waste using floating drum anaerobic digester
pp.6298-6302
S.Sathish, S.Vivekanandan

Thermodynamic Analysis of a Lithium Bromide Absorption Heat Pump using Waste Heat
pp.6303-6306
BALAJI.K,, GURUBALAN.A, ,SATHISH.S, SENTHILKUMAR.R

ICI/ISI Interference Prediction using Nonlinear Auto-Regressive Network
pp. 6307-6314
G.S.Priya, Dr.Sharmini Enoch

A New Artificial Immune Algorithm for Solving Gear Design Problem
pp.6315-6319
S.Padmanabhan, Dr. M.Chandrasekaran, Hariprasad.E. and Peter Leo Jeffrey.K

ENHANCEMENT AND INVESTIGATION OF MECHANICAL PROPERTY OF ELECTROSPUN MAT PREPARED USING CDC
pp.6320-6325
P.PATHALAMUTHU, Dr.A.SIDDHARTHAN, and Dr.V.R.GIRIDEV

Comparative Study on Vibration characteristics of Straight and Curved beam of box shaped cross section subjected under Cantilever end condition
pp.6326-6330
C.Senthamaraikannan, L.Radha swamy, Dr.R.Ramesh

NEURAL NETORK MODELS FOR BLIND SOURCE SEPARATION IN BIOMEDICAL APPLICATIONS: A REVIEW
pp.6331-6339
S.R.Breesha, Dr.X.Felix Joseph

Status of wind energy
pp.6340-6343
SelvanNambi S, G.M.JoslinHerbert

Feasibility of Mixing Coir-Pith with Coconut Shell in a Downdraft Biomass Gasifier-An Experimental Study
pp.6344-6349
V. ChristusJeya Singh, and S.Joseph Sekhar

Investigation on Optimal Process Parameters in EDM of LM25 Al/15%SiCp Using Response Surface MethodologyThrough Mathematical Modeling
pp.6350-6354
Rajesh. R,Dev Anand. M

BIOMASS: THE ENERGY FOR SUSTAINABLE DEVELOPMENT
pp.6355-6358
A.Unni Krishnan, G.M.Joselin Herbert

Compendium of Biomass Technology for Greenhouse Gas Emission Reductions
pp.6359-6362
G.M. Joselin Herbert, A. Unnikrishan and D. Amutha

Experimental Study on Quarter Car Model using the combination of MR fluid damper and Hybrid Magnet
pp.6363-6336
D.Easu,R.Amrutha ,A.Siddharthan

Review on Friction Stir Welding
pp.6367-6371
R.Ashok kumar, M.R.Thansekhar

STUDIES TO PREVENT OXIDATION DURING ROOT WELDING OF T91STEEL TUBES
pp.6372-6375
Maridurai T, Obli Narasimharajan.O, Sandhyarani Biswas

ANN Modeling of Wire-electro discharge Machined WC-Co Metal Matrix Composite
pp.6376-6384
V. Muthuraman, R. Ramakrishnan K.Kartik T.Latheesh kumar, P.Sengottuvel

ANALYSIS OF HAZ IN EDM CUTTING OF ASTM A335 P92 MATERIAL BY EVALUATING MICROSTRUCTURE AND MICRO VICKER’S HARDNESS NUMBER
pp.6355-6389
Maridurai T, M.Syed Zameeruddin, Sandhyarani Biswas

OPTIMIZATION OF WEAR BEHAVIOUR IN ALUMINIUM REINFORCED BORON CARBIDE COMPOSITE USING TAGUCHI TECHNIQUE
pp.6390-6395
K.S.Sridhar Raja, V.K.Bupesh Raja

Comparative Test on MESG in Open Chamber Diesel Cycle Combustion Engine
pp.6396-6400

KARTHIKAYAN.S, SANKARANARAYANAN.G

A brief reviews on environmental aspects of wind energy and biomass.
pp.6401-6404
G.M. Joselin Herbert , S. Selvan Nambi and A. Unnikrishnan

Mechanical behavior of FRP composites with used Fishnet/glass fiber and polyester matrix
pp.6405-6408
MICHAEL RAJ.F, NAGARAJAN.V.A , VINOD KUMAR.K.P

An experimental analysis in detection of root cause fault occurrence in steam turbines using artificial neural networks
pp.6409-6414
S. Devi1, , L. Sivakumar, and M. Saravanan

PRODUCTION AND PROPERTIES OF ALUMINUM TITANUM DIBORIDE COMPOSITES FORMED STIR CASTING
pp.6415-6419
M.M.Siva, R.Rajesh and S.Pugazhendhi

EVALUATE THE EFFICIENCY OF HEALTH CARE CENTRES IN INDIA USING DATA ENVELOPMENT ANALYSIS
pp.6420-6430
N.Ramasamy, R.Rajesh and S.Pugazhendhi and T.R. Manoharan,

DEVELOPING FRAMEWORK FOR SELECTION OF THIRD PARTY REVERSE LOGISTICS PROVIDER
pp.6431-6437
S. Robin Divahar, C. Sudhahar

Numerical investigation on effect of cutouts in fiber composites
pp.6438-6443
Anoop Kumar S , R.Rajesh and S.Pugazhendhi

MECHANICAL PROPERTIES EVALUATION OF ALUMINIUM (LM25) TITANIUM DIBORIDE METAL MATRIX COMPOSITES (Al-TiB2)
pp.6444-6448
Kim J Seelan, R.Rajesh, and S.Pugazhendhi

Flow stress modeling of as cast and welded ZE41A magnesium alloy at elevated temperature
pp.6449-6456
M.Sivapragash, P.R.Lakshminarayanan, R.Karthikeyan, M.Hanumantha , A.Ramkumar

Improving Mechanical Properties of Mg alloy by optimizing the Composition Elements using Grey based Taguchi Method
pp.6457-6461
G.Robertsingh, M.Sivapragash and R.Anish

A case study of Total failure mode and effects analysis in tea industry
pp.6462-6472
Angeline Geethaangeline, Dr.R.SureshPremilkumar

Extraction of Alternative fuel from Mahua oil for Internal Combustion Engine using Taguchi Method
pp.6473-6679
R.R.Neela Rajan , R.Rajesh S.Pugazhendhi

DEVELOPMENT OF A BALANCED SCORECARD FOR HOSPITALS AND MODEL FOR PATIENT SATISFACTION
pp.6480- 6485

N.Ramasamy, R.Rajesh and S.Pugazhendhi

Design And Testing Of Exhaust Gas Treatment In Automobiles
pp.6486-6488

T.S.Anandhasekar

PROPERTY ANALYSIS OF ALUMINUM TITANUM DIBORIDE COMPOSITES.

pp.6589-6594

M.M.Siva, R.Rajesh, and S.Pugazhendhi

Design and comparison of Length-compatible Low-Density Parity-Check Codes Free of Small Trapping Sets

pp.6559-6500

S. Suresh Kumar and R. Rajaram

Power Control Strategy for Variable-Speed Fixed-Pitch Wind Turbines

pp.6501-6505

Jeniba .R ,Jagatheeswari .P, band Mary Linda .M

APPLYING ARTIFICIAL NEURAL NETWORK TO SIMULATEINCLINED TWO PHASE CLOSED THERMOSYPHON

pp.6506-6510

M.Karthikeyan, S.Vaidyanathan, B.Sivaraman, R.Senthilkumar

Obstacle Detection and Collision Avoidance for indoor navigation of a MAV using Sonar Sensors

pp.6511-6514

Anbarasu B, Amardeep A, Anitha G

ANALYSIS AND INVESTIGATION ON THERMAL BEHAVIOURS OF BALL BEARING IN HIGH SPEED SPINDLE

pp.6515-6524

Balamurugan.N, Prof.C.Bhagyanathan

Mathematical Modeling for Bead Geometry of Hardfacing Low Carbon Steel with Corrosive Resistant alloy using GMAW

pp.6525-6529

C. Bhagayanathan, P.Karrupuswamy

Submerged Friction Stir Welding and Processing: Insights of Other Researchers

pp.6530-6536

C.Rathinasuriyan, Dr.V.S.Senthil Kumar

An Enhanced Modular Multiplication In Cryptography

pp.6537-6541

Bremiga.G.G and Dr.Sharmini

PRODUCTION AND PROPERTIES OF ALUMINUM TITANUM DIBORIDE COMPOSITES FORMED STIR CASTING

pp.6542-6546

M.M.Siva, R.Rajesh and S.Pugazhendhi

Nano silver based Low Profile Monopole antenna

pp.6547-6552

J.Arul Linsely, A.Shajin Nargunam